Inspection and Test Plan for Gas Circuit Breaker

The inspection and test plan for Gas Circuit Breaker article provides you information about gas circuit breaker test and gas circuit breaker inspection in manufacturing shop. The draft Inspection and test plan for gas circuit breaker provided as well.

Click here if you like immediately review the Inspection &Test Plan for Gas Circuit Breaker draft sheet.

You may need to review this sheet in conjunction of Third Party Inspection for Gas Circuit Breaker article.

Click following link if you need to review general definition for Inspection and Test Plan.

Inspection and Test Plan

The IEC, NEC, NEMA, FDF, ISO ANSI, CI, IPCEA standard requirements normally are applied for inspection and test plan in manufacturing shop.

The witness of some inspection and test by third party inspector is mandatory and cannot be waived.

Some others must only monitored and fully witnessing are not necessary, for these thing, the inspection man-days etc. depends to the purchaser decision, some prefer stringent monitoring and even assign resident inspector in manufacturing shop and some others relay to quality control system of the manufacture and assign only few days for monitoring points.

These are some of inspection points in the inspection and test plan for Gas Circuit Breaker which need to be witnessed, checking, monitored and reviewed by third party inspector in Gas Circuit Breaker manufacture shop.

Important Points

  • Checking of outline dimensions, interface dimensions, bus bar dimensions and Clearances and other specified dimensions
  • Checking tightness/torque of terminals
  • Checking degree of protection
  • Witnessing gas circuit breaker air Pressure test
  • Witnessing gas circuit breaker leakage test
  • Witnessing Gas Circuit Breaker Stored Energy System Test
  • Witnessing Gas Circuit Breaker Power Frequency Voltage Dry Tension the Main Circuit
  • Witnessing Gas Circuit Breaker Voltage Test on Control and Auxiliary Circuit
  • Witnessing Gas Circuit Breaker Measurement of Resistance of the Main Circuit
  • Witnessing Gas Circuit Breaker Mechanical Operation Test
  • Witnessing Gas Circuit Breaker Timing Test (Operating Test)
  • Gas Circuit Breaker Compressor Operation Test

Click here to see Inspection & Test Plan for Gas Circuit Breaker draft sheet.

Related Articles:

Inspection and Test Plan for Generator, Inspection and Test Plan for Power Cable, Inspection and Test Plan for Induction Motor, Inspection and Test Plan for Switchgear, Inspection and Test Plan for Electrical Insulator, Inspection and Test Plan for Bus Duct, Inspection and Test Plan for Control Panel, Inspection and Test Plan for Battery Charger, Inspection and Test Plan for UPS Storage Battery, Inspection and Test Plan for Power Transformer


Return from Inspection and Test Plan for Gas Circuit Breaker to Inspection and Test Plan

Return from Inspection and Test Plan for Gas Circuit Breaker to Inspection for Industry Home


New! Comments

Have your say about what you just read! Leave me a comment in the box below.