Ultrasonic Level Transmitter Inspection and Test Plan 

This is a sample ultrasonic level transmitter inspection and test plan. You might need to change it to meet your purchase order specifications. 

Ultrasonic Level Transmitter Inspection and Test Plan TaskVendorTPI InspectionClient
Ultrasonic level transmitter mill test reportHRR
Ultrasonic level transmitter Calibration testHWR
Ultrasonic level transmitter Performance test including hystersisHWR
Ultrasonic level transmitter Insulation resistance testHWR
Ultrasonic level transmitter Final visual / Dimension InspectionHHR
Ultrasonic level transmitter Documentation review prior to release(Final activity of Technical Inspection)HHR
Ultrasonic level transmitter Pre-shipment InspectionHHR

H: Hold Point implies that relevant production activities shall not proceed until the continuation of work is permitted by Purchaser. (Notification req'd)

W: Witness point implies that Purchaser intends to witness the designated inspection feature. If Purchaser decides not to witness the relevant feature, production can proceed without permission of Purchaser. (Notification req'd)

S: Witness, but spot check basis. Initial operation will be witness point and subsequent operation will be witnessed at discretion of Purchaser considering the results of previous inspection. (Notification not req'd : Randam Inspection)

R: Review inspection & test records (Notification not req'd)

General Note for Ultrasonic Level Transmeter :

1) Ultrasonic Level Transmitter witness/hold point by Code Inspector, when applied by Code /Local Regulation, is to comply with its requirements and to specify in Vendor's ITP.

2) Type of Inspection by Ultrasonic Level Transmitter Purchaser may be changed according to equipment criticality and vendor QC evaluation at job stage.

3) When requested in the requisition, detailed Ultrasonic Level Transmitter ITP shall be submitted by Vendor.

4) Monitoring/Observation of Ultrasonic Level Transmitter Vendor shop daily routine works (i.e. Storage of materials, Adherence to approved procedures, Testing tool calibration check,workmanship,cleanliness and etc.) shall be done by Purchaser during inspection visit.

5)100% Ultrasonic Level Transmitter inspection which is covered by the combination of witness / spot check / record review inspection & tests listed above and vendor's original QC activity shall be confirmed by Purchaser's inspector prior to shipment.

6)Unless otherwise specified in Ultrasonic Level Transmitter REQ., the sampling Q'ty of " S (Spot Witness Check) " shall be as follows:

3 to 20→3Pcs(all if total 2 and less) , 21 to 50→5Pcs, 51 to 100→10Pcs,101 to 200→20Pcs, 201 to 300→30Pcs, 301 to 500→50Pcs

Minimum 25 pcs or more of the commodity shall be arranged for H/W/S inspection and test at one time inspector's visit as much as practical.

7)Final Ultrasonic Level Transmitter Visual Inspection/Documentation Review/Pre-Shipment Inspection may be combined within one time visit.

Return from Ultrasonic Level Transmitter Inspection and Test Plan to Inspection and Test Plan

Return from Ultrasonic Level Transmitter Inspection and Test Plan to Inspection for Industry Home

New! Comments

Have your say about what you just read! Leave me a comment in the box below.