ASME PCC 2 Article 201 Training

I4I Academy free courses offers a range of courses focused on API inspection and ASME standards, designed to help participants enhance their understanding and expertise in these areas. By enrolling in these free courses, participants not only gain valuable knowledge and skills but also have the opportunity to earn points. These points can be accumulated through course participation and other specified activities. Once enough points are collected, they can be used to receive discounts on the fees for other, more advanced courses offered by I4I Academy. This system provides a great incentive for learners to continue their education and development within the field, making professional advancement more accessible and affordable. Additionally, each bonus point earned is equivalent to one US dollar, further enhancing the value of participating in these courses.

ASME PCC 2 Article 201 Training - Butt-Welded Insert Plates in Pressure Components
Earn 5 Bonus Points by Taking this 2 hours I4I Academy Free Courses 

Enroll Me in this Course
Please note that all fields followed by an asterisk must be filled in.

Please complete the challenge that you see below.

  

Watch the full training video first, then complete the quiz to test your understanding and receive credit for the course.

Article 201 Insert Plate Quiz (20 Questions)

Article 201 Insert Plate Quiz

Enter your email address and course registration code (sent to your email address), answer all 20 questions, then click Submit to receive your score. After submitting, each question will show Your answer, the Correct answer, and the Reference section number directly under that question.

1) A butt-welded insert plate repair is best described as:

2) A repair plan proposes an insert plate so large that most of a shell course will be rebuilt. What is the best engineering response?

3) Before starting an insert plate repair, which factors must be confirmed because matching chemistry alone is not enough? Select ALL

4) A vessel under external pressure receives an insert plate repair. Compared with internal pressure service, which concern becomes most critical?

5) If a component has corrosion-resistant cladding, lining, or overlay, the repair must restore:

6) An engineer proposes using an insert plate much thicker than the surrounding wall “for extra safety.” What is the best evaluation?

7) A rectangular insert plate is 20 mm thick. What is the minimum required corner radius?

8) A rectangular insert plate is 30 mm thick. What is the minimum required corner radius?

9) For a carbon or low-alloy, non-PWHT butt-welded insert plate with parent thickness t = 20 mm, the minimum insert size is the lesser of 12t or 380 mm. What is the minimum size?

10) For a carbon or low-alloy, non-PWHT butt-welded insert plate with parent thickness t = 40 mm, the minimum insert size is the lesser of 12t or 380 mm. What is the minimum size?

11) Proper insert plate sizing should accomplish which of the following? Select ALL

12) For certain carbon and low-alloy, non-PWHT nozzle insert cases, what minimum distance shall be maintained between the nozzle attachment weld and the nearest edge of the insert plate butt weld?

13) If a nozzle OD is 200 mm, the insert diameter does not need to exceed:

14) During fit-up of a curved shell insert, the plate does not naturally match shell curvature. What is the best action?

15) Why are double-welded butt joints preferred where possible for insert plate repairs?

16) For flush inserts or any one-sided access situation, which first-pass welding process is recommended?

17) For a nominal thickness of 6 mm, what is the maximum permitted grinding reduction?

18) For non-PWHT adjacent butt welds with weld thickness tᵥ = 20 mm, minimum spacing is the greater of 250 mm or 8tᵥ. What is the required minimum spacing?

19) Reduced spacing between adjacent non-PWHT butt welds is allowed only when which added controls are used? Select ALL

20) Volumetric NDE is central for insert plate welds because it can detect which of the following? Select ALL

Passing score is 70%. If you do not pass on your first try, you may retake the quiz as many times as needed. Only your final passing attempt with a score of 70% or higher will be submitted to I4I Academy.

More Free Courses Coming Soon 

Check our CPD Courses:

 

Free newsletter!

Sign up to receive my monthly newsletter covering all the latest courses and updates.